01786 472850
[email protected]
See our Technical Videos at:
Total Weight: 349g
Product data subject to change without notice
Material: PVC
Manufacturing standards: WRAS, BS-EN1452-3, BS4346-1, ISO9001, ISO14001
Jointing process: compression sockets; instant pressurisation without the need to glue
Maximum working pressure: 10bar
Manufacturer: ERA*
Operating temperature: 0-60°C
Full specification sheet:
*(We usually have plenty of these in stock; however, if we have a sudden large demand and run short, an alternative manufacturer's part, with the same specifications and as close to the same dimensions stated above, may be supplied in its place)
The pressure rating of PVC pipe and fittings reduces with increasing temperature. To calculate the actual pressure rating of the product at each temperature, the noted pressure rating must be multiplied by the 'de-rating multiple', as explained on our PVC category page.
The temperature derating table of this fitting is as follows:
PVC pipe has a recommended operating temperature of 0 - 60° centigrade (32 - 140°F).
This 1 1/2" plain compression repair coupler is compatible with 1 1/2" PVC pressure pipes. It is not compatible with metric PVC pressure pipes or fittings. 1 1/2" pipe actually has an outside diameter of 48.3mm.
1 1/2" pipe (measuring 48.3mm outer diameter) will slot inside the end of this compression repair coupler and be able to slide up and down the full fitting as there is no stop inside.
PVC (or PVCU) is one of the most widely used plastics in general industry. Its ease of installation, rigidity, WRAS approval, and low price point compared to many other plastics makes it ideal for applications such as:
In addition, PVC pipe also finds its way into many domestic applications, including:
The current stock status of this item is:
IN STOCK for immediate dispatch by carrier.
Delivery options for this item are:
This 1 1/2" PVC plain compression repair coupler is eligible for return - please see our returns page for more information.
