25mm Full Face Flange (M12 4 hole PN10/16 drilling PCD 75mm)

Material: PVC

Manufacturing standards: WRAS, DIN-8063, ISO9001, ISO14001

Jointing process: Solvent cement socket end. For more information, refer to solvent welding article.

Maximum working pressure: 16bar

Manufacturer: ERA*

Operating temperature: 0-60°C

Full specification sheet: 

*(We usually have plenty of these in stock; however, if we have a sudden large demand and run short, an alternative manufacturer's part, with the same specifications and as close to the same dimensions stated above, may be supplied in its place)

The pressure rating of PVC pipe and fittings reduces with increasing temperature. To calculate the actual pressure rating of the product at each temperature, the noted pressure rating must be multiplied by the 'de-rating multiple', as explained on our PVC category page.

The temperature derating table of this fitting is as follows:

PVC pipe has a recommended operating temperature of 0 - 60° centigrade (32 - 140°F).

This 25mm plain full face flange is compatible with 25mm PVC pressure pipe. It is not compatible with inch PVC pressure pipes or fittings.

25mm pipes (measuring 25mm outer diameter) will slot inside the socket end of this full face flange to be solvent welded.

PVC (or PVCU) is one of the most widely used plastics in general industry. Its ease of installation, rigidity, WRAS approval, and low price point compared to many other plastics makes it ideal for applications such as:

• Factories and general process industries
• Swimming pools and spas
• Aquaculture, hydroponics, and aquaponics
• Agriculture and irrigation
• Water processing and treatment

In addition, PVC pipe also finds its way into many domestic applications, including:

• Salt and freshwater aquaria
• Ponds and water features
• Home pools, hot tubs, and spas
• Micro irrigation

The current stock status of this item is:

IN STOCK for immediate dispatch by carrier.

Delivery options for this item are:

• Next Working Day
• 2-3 Working Day

This 25mm PVC plain full face flange is eligible for return - please see our returns page for more information.