Imperial PVC Tank Connector/Bulkhead
Watch:
Bulkhead/Tank Connector Fittings (7mins) - Summary available at bottom of page
For full product information and dimensions please download our product spec sheet.
Planning on connecting to the male thread on the tank connector / bulkhead?
10 bar WP. A 22mm Holesaw is recommended for threaded end. A small bead of silicone should be used externally. WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
10 bar WP. A 27mm Holesaw is recommended for threaded end. A small bead of silicone should be used externally. WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
10 bar WP. A 35mm Holesaw is recommended for threaded end. A small bead of silicone should be used externally. WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
10 bar WP. A 43mm Holesaw is recommended for threaded end. A small bead of silicone should be used externally. WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
10 bar WP. A 51mm Holesaw is recommended for threaded end. A small bead of silicone should be used externally. WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
10 bar WP. A 60mm Holesaw is recommended for threaded end. A small bead of silicone should be used externally. WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
Has a 63mm socket on both sides and a single 75mm spigot on the plain side. PN10 WP. A 76mm Holesaw is recommended for threaded end. A small bead of silicone should be used externally. WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
10 bar WP. A 92mm Holesaw is recommended for threaded end. A small bead of silicone should be used externally. WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
10 bar WP. A 114mm Holesaw is recommended for threaded end. A small bead of silicone should be used externally. WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
10 bar WP. A 168mm Holesaw is recommended for threaded end. A small bead of silicone should be used externally. WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse