01786 472850
[email protected]
See our Technical Videos at:
PN10 WP, WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
Total Weight: 85g
Product data subject to change without notice
Thread Measurements
The inch label for threads in imperial and metric fittings do not match the inches on a ruler.
The measurements of this thread are:
Major - OD = 59.6mm
Minor - ID = 56.7mm
Material: PVC
Manufacturing standards: WRAS, BS-EN1452-3, BS4346-1, BS21, ISO727, ISO7-1, DIN-2999, ISO9001, ISO14001
Jointing process: Solvent cement spigot end x BSP thread (with use of thread sealant such as PTFE tape). For more information, refer to solvent welding article.
Maximum working pressure: 10bar
Manufacturer: Effast*
Operating temperature: 0-60°C
*(We usually have plenty of these in stock; however, if we have a sudden large demand and run short, an alternative manufacturer's part, with the same specifications and as close to the same dimensions stated above, may be supplied in its place)
The pressure rating of PVC pipe and fittings reduces with increasing temperature. To calculate the actual pressure rating of the product at each temperature, the noted pressure rating must be multiplied by the 'de-rating multiple', as explained on our PVC category page.
The temperature derating table of this fitting is as follows:
PVC pipe has a recommended operating temperature of 0 - 60° centigrade (32 - 140°F).
This 75mm x 2" plain to threaded FBSP reducing bush is compatible with 75mm PVC plain socket-ended fittings and 2" BSP male threaded fittings. The solvent weld end is not compatible with inch PVC socket-ended fittings. The BSP female threaded end is compatible with BSP male threads on both inch and metric fittings. 2" pipe actually has an outside diameter of 60.3mm.
The 75mm spigot end (measuring 75mm outside diameter) of this plain to threaded reducing bush will slot inside the socket end of a 75mm fitting to be solvent welded. 2" male BSP threaded fittings will thread into the female threaded end of this reducing bush.
PVC (or PVCU) is one of the most widely used plastics in general industry. Its ease of installation, rigidity, WRAS approval, and low price point compared to many other plastics makes it ideal for applications such as:
In addition, PVC pipe also finds its way into many domestic applications, including:
The current stock status of this item is:
IN STOCK for immediate dispatch by carrier.
Delivery options for this item are:
This 75mm x 2" PVC plain to FBSP reducing bush is eligible for return - please see our returns page for more information.
WRAS approved (suitable for potable water)