01786 472850
[email protected]
See our Technical Videos at:
PN10 WP, WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
Total Weight: 10g
Product data subject to change without notice
Material: PVC
Manufacturing standards: WRAS, DIN-8063, ISO9001, ISO14001
Jointing process: Solvent cement socket ends. For more information, refer to solvent welding article.
Maximum working pressure: 10bar
Manufacturer: ERA*
Operating temperature: 0-60°C
*(We usually have plenty of these in stock; however, if we have a sudden large demand and run short, an alternative manufacturer's part, with the same specifications and as close to the same dimensions stated above, may be supplied in its place)
The pressure rating of PVC pipe and fittings reduces with increasing temperature. To calculate the actual pressure rating of the product at each temperature, the noted pressure rating must be multiplied by the 'de-rating multiple', as explained on our PVC category page.
The temperature derating table of this fitting is as follows:
PVC pipe has a recommended operating temperature of 0 - 60° centigrade (32 - 140°F).
This 32mm x 25mm plain reducing bush is compatible with 32mm PVC pressure socket fittings, and 25mm PVC pressure pipe or spigot fittings. It is not compatible with imperial PVC pressure pipes or fittings.
The 32mm outer diameter of this reducing bush will slot inside the socket end of a plain 32mm fitting. 25mm pipe or spigot fittings (measuring 25mm outer diameter) will slot inside the 25mm socket end of this reducing bush.
PVC (or PVCU) is one of the most widely used plastics in general industry. Its ease of installation, rigidity, WRAS approval, and low price point compared to many other plastics makes it ideal for applications such as:
In addition, PVC pipe also finds its way into many domestic applications, including:
The current stock status of this item is:
IN STOCK for immediate dispatch by carrier.
Delivery options for this item are:
This 32mm x 25mm PVC plain reducing bush is eligible for return - please see our returns page for more information.