01786 472850
[email protected]
See our Technical Videos at:
PN10 WP, WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
Total Weight: 18g
Product data subject to change without notice
Thread Measurements
The inch label for threads in imperial and metric fittings do not match the inches on a ruler.
The measurements of this thread are:
Major - OD = 21.0mm
Minor - ID = 18.6mm
Material: PVC
Manufacturing standards: WRAS, BS-EN1452-3, BS4346-1, BS21, ISO727, ISO7-1, DIN-2999, ISO9001, ISO14001
Jointing process: Solvent cement socket end x BSP thread (with use of thread sealant such as PTFE tape). For more information, refer to solvent welding article.
Maximum working pressure: 10bar
Manufacturer: ERA*
Operating temperature: 0-60°C
*(We usually have plenty of these in stock; however, if we have a sudden large demand and run short, an alternative manufacturer's part, with the same specifications and as close to the same dimensions stated above, may be supplied in its place)
The pressure rating of PVC pipe and fittings reduces with increasing temperature. To calculate the actual pressure rating of the product at each temperature, the noted pressure rating must be multiplied by the 'de-rating multiple', as explained on our PVC category page.
The temperature derating table of this fitting is as follows:
PVC pipe has a recommended operating temperature of 0 - 60° centigrade (32 - 140°F).
This 20mm x 1/2" plain to threaded MBSP adaptor is compatible with 20mm PVC pressure pipe and spigot fittings, and 1/2" BSP female threaded fittings. The solvent weld end is not compatible with inch PVC pressure pipe or spigot fittings. The BSP male threaded end is compatible with BSP female threads on both inch and metric fittings. 1/2" pipe actually has an outside diameter of 21.4mm.
20mm pipes or spigot fittings (measuring 20mm outer diameter) will slot inside the plain end of this MBSP adaptor to be solvent welded. 1/2" female BSP threaded fittings will thread onto the male threaded end of this MBSP adaptor.
PVC (or PVCU) is one of the most widely used plastics in general industry. Its ease of installation, rigidity, WRAS approval, and low price point compared to many other plastics makes it ideal for applications such as:
In addition, PVC pipe also finds its way into many domestic applications, including:
The current stock status of this item is:
IN STOCK for immediate dispatch by carrier.
Delivery options for this item are:
This 20mm x 1/2" PVC plain to threaded MBSP adaptor is eligible for return - please see our returns page for more information.
WRAS approved (suitable for potable water)