01786 472850
[email protected]
See our Technical Videos at:
Fits both 160mm and 6" pipe, PN16 WP, WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
Total Weight: 54g
Product data subject to change without notice
Material: EPDM
Manufacturing standards: WRAS, BS-EN1452-3, BS4346-1, ISO9001, ISO14001
Jointing process: Used with stub flanges and backing rings.
Maximum working pressure: 16bar
Manufacturer: Effast*
Operating temperature: 0-60°C
*(We usually have plenty of these in stock; however, if we have a sudden large demand and run short, an alternative manufacturer's part, with the same specifications and as close to the same dimensions stated above, may be supplied in its place)
The pressure rating of PVC pipe and fittings reduces with increasing temperature. To calculate the actual pressure rating of the product at each temperature, the noted pressure rating must be multiplied by the 'de-rating multiple', as explained on our PVC category page.
The temperature derating table of this fitting is as follows:
PVC pipe has a recommended operating temperature of 0 - 60° centigrade (32 - 140°F).
This 160mm / 6" stub gasket is compatible with 160mm PVC stub flanges, and 6" PVC stub flanges. It will be used with 160mm or 6" stub flanges and backing rings to create a seal.
PVC (or PVCU) is one of the most widely used plastics in general industry. Its ease of installation, rigidity, WRAS approval, and low price point compared to many other plastics makes it ideal for applications such as:
In addition, PVC pipe also finds its way into many domestic applications, including:
The current stock status of this item is:
IN STOCK for immediate dispatch by carrier.
Delivery options for this item are:
This 160mm / 6" EPDM stub gasket is eligible for return - please see our returns page for more information.
