See our Technical
PN10 WP, WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
Total Weight: 271g
Product data subject to change without notice
Manufacturing standards: WRAS, DIN-8063,
Jointing process: Solvent cement socket ends. For more
information, refer to solvent welding
Maximum working pressure: 16bar
Operating temperature: 0-60°C
*(We usually have plenty of these in stock; however, if we have a sudden
large demand and run short, an alternative manufacturer's part, with the same specifications and as
close to the same dimensions stated above, may be supplied in its place)
The pressure rating of PVC pipe and fittings reduces with increasing temperature. To calculate the actual
pressure rating of the product at each temperature, the noted pressure rating must be multiplied by the
'de-rating multiple', as explained on our
PVC category page.
The temperature derating table of this fitting is as follows:
PVC pipe has a recommended operating temperature of 0 - 60° centigrade (32 - 140°F).
This 125mm x 110mm plain reducing bush is compatible with 125mm PVC pressure socket fittings, and 110mm
PVC pressure pipe or spigot fittings. It is not compatible with imperial PVC pressure pipes or fittings.
The 125mm outer diameter of this reducing bush will slot inside the socket end of a plain 125mm fitting.
110mm pipe or spigot fittings (measuring 110mm outer diameter) will slot inside the 110mm socket end of
this reducing bush.
PVC (or PVCU) is one of the most widely used plastics in general industry. Its ease of installation,
rigidity, WRAS approval, and low price point compared to many other plastics makes it ideal for
applications such as:
In addition, PVC pipe also finds its way into many domestic applications, including:
The current stock status of this item is:
IN STOCK for immediate dispatch by carrier.
Delivery options for this item are:
This 125mm x 110mm PVC plain reducing bush is eligible for return - please see our returns page
for more information.