01786 472850
[email protected]
See our Technical Videos at:
Currently in stock at our UK warehouse
Total Weight: 12g
Product data subject to change without notice
Thread Measurements
The inch label for threads in imperial and metric fittings do not match the inches on a ruler.
The measurements of the 1/2" thread are:
Major - OD = 21.0mm
Minor - ID = 18.6mm
The measurements of the 3/8" thread are:
Major - OD = 16.7mm
Minor - ID = 15mm
Material: Brass
Manufacturing standards: BS21, ISO727, ISO7-1, DIN-2999, ISO9001, ISO14001
Jointing process: BSP thread (with use of thread sealant such as PTFE tape).
Maximum working pressure: 10bar
Manufacturer: Profec*
Operating temperature: 0-95°C
*(We usually have plenty of these in stock; however, if we have a sudden large demand and run short, an alternative manufacturer's part, with the same specifications and as close to the same dimensions stated above, may be supplied in its place)
This 1/2" x 3/8" MBSP x FBSP brass reducing bush is compatible with 1/2" female BSP threaded fittings, and 3/8" male BSP fittings, which will thread into the female BSP end. It is not compatible with metric PVC pressure pipes or plain fittings; however, it is compatible with the 1/2" female BSP or 3/8" male BSP threaded end of a metric plain to threaded fitting.
Brass plumbing fittings are used in applications such as:
In addition, brass also finds its way into many domestic applications, including:
The current stock status of this item is:
IN STOCK for immediate dispatch by carrier.
Delivery options for this item are:
This 1/2" x 3/8" MBSP x FBSP brass reducing bush is eligible for return - please see our returns page for more information.
WRAS approved (suitable for potable water)