| A |
B |
C |
D |
E |
F |
G |
| 182.8mm |
131.3mm |
113mm |
132.1mm |
110mm |
39.3mm |
61mm |
Total Weight: 1055g
Product data subject to change without notice
Thread Measurements
The measurements of threads on imperial and metric fittings, denoted in inches, do not match the inches
on a ruler.
The measurements of this thread are:
Major - OD = 113.0mm
Minor - ID = 110.1mm
Material: PVC
Manufacturing standards: WRAS, BS-EN1452-3, BS4346-1,
BS21, ISO727, ISO7-1, DIN-2999, ISO9001, ISO14001
Jointing process: Solvent cement socket end x BSP
thread (with use of thread sealant such as PTFE tape). For more information, refer to
solvent welding article.
Maximum working pressure: 10bar
Manufacturer: Effast*
Operating temperature: 0-60°C
Full specification sheet:
*(We usually have plenty of these in stock; however, if we have a sudden
large demand and run short, an alternative manufacturer's part, with the same specifications and as
close to the same dimensions stated above, may be supplied in its place)
The pressure rating of PVC pipe and fittings reduces with increasing temperature. To calculate the actual
pressure rating of the product at each temperature, the noted pressure rating must be multiplied by the
'de-rating multiple', as explained on our
PVC category page.
The temperature derating table of this fitting is as follows:
| Temperature (°C) |
Pressure Rating (bar) |
| 20 |
10 |
| 30 |
8 |
| 40 |
5.8 |
| 50 |
3.9 |
| 60 |
2.2 |
PVC pipe has a recommended operating temperature of 0 - 60° centigrade (32 - 140°F).
This 110mm x 4" plain to threaded 90° elbow is compatible with 110mm PVC pressure pipe and spigot fittings, and
4" BSP male threaded fittings. The solvent weld end is not compatible with inch PVC pressure pipe or spigot
fittings. The BSP female threaded end is compatible with BSP male threads on both inch and metric fittings. 4" pipe
actually has an outside diameter of 114.3mm.
110mm pipes or spigot fittings (measuring 110mm outer diameter) will slot inside the plain end of this
90° elbow to be solvent welded. 4" male BSP threaded fittings will thread into the female threaded
end of this 90° elbow.
PVC (or PVCU) is one of the most widely used plastics in general industry. Its ease of installation,
rigidity, WRAS approval, and low price point compared to many other plastics makes it ideal for
applications such as:
- Factories and general process industries
- Swimming pools and spas
- Aquaculture, hydroponics, and aquaponics
- Agriculture and irrigation
- Water processing and treatment
In addition, PVC pipe also finds its way into many domestic applications, including:
- Salt and freshwater aquaria
- Ponds and water features
- Home pools, hot tubs, and spas
- Micro irrigation
The current stock status of this item is:
IN STOCK for immediate dispatch by carrier.
Delivery options for this item are:
- Next Working Day
- 2-3 Working Day
For more information, including our order cut-off times and postcode availability, please see our
delivery info page.
This 110mm x 4" PVC plain to threaded 90° elbow is eligible for return - please see our returns page
for more information.
