01786 472850
[email protected]
See our Technical Videos at:
10 bar WP. A 43mm Holesaw is recommended for threaded end. A small bead of silicone should be used externally. WRAS approved (suitable for potable water)
Currently in stock at our UK warehouse
Total Weight: 152g
Product data subject to change without notice
Thread Measurements
The inch label for threads in imperial and metric fittings do not match the inches on a ruler.
The measurements of this thread are:
Major - OD = 41.9mm
Minor - ID = 39.0mm
Material: PVC
Manufacturing standards: WRAS, BS-EN1452-3, BS4346-1, BS21, ISO727, ISO7-1, DIN-2999, ISO9001, ISO14001
Jointing process: Solvent cement spigot end x BSP thread (with use of thread sealant such as PTFE tape). For more information, refer to solvent welding article.
Maximum working pressure: 10bar
Manufacturer: Effast*
Operating temperature: 0-60°C
*(We usually have plenty of these in stock; however, if we have a sudden large demand and run short, an alternative manufacturer's part, with the same specifications and as close to the same dimensions stated above, may be supplied in its place)
The pressure rating of PVC pipe and fittings reduces with increasing temperature. To calculate the actual pressure rating of the product at each temperature, the noted pressure rating must be multiplied by the 'de-rating multiple', as explained on our PVC category page.
The temperature derating table of this fitting is as follows:
PVC pipe has a recommended operating temperature of 0 - 60° centigrade (32 - 140°F).
This 1 1/4" plain spigot to MBSP tank connector is compatible with 1 1/4" PVC plain socket-ended fittings, and 1 1/4" BSP female threaded fittings. It is not compatible with metric PVC pressure pipes or plain fittings; however, it is compatible with the 1 1/4" female threaded end of a metric plain to threaded fitting. 1 1/4" pipe actually has an outside diameter of 42.2mm.
This 1 1/4" plain spigot (measuring 42.2mm outer diameter) to MBSP tank connector will slot inside the socket end of a 1 1/4" fitting to be solvent welded. 1 1/4" female BSP threaded fittings will thread onto the male threaded end of this tank connector.
PVC (or PVCU) is one of the most widely used plastics in general industry. Its ease of installation, rigidity, WRAS approval, and low price point compared to many other plastics makes it ideal for applications such as:
In addition, PVC pipe also finds its way into many domestic applications, including:
The current stock status of this item is:
IN STOCK for immediate dispatch by carrier.
Delivery options for this item are:
This 1 1/4" PVC plain spigot to MBSP tank connector is eligible for return - please see our returns page for more information.
