01786 472850
[email protected]
See our Technical Videos at:
Currently in stock at our UK warehouse
Total Weight: 20g
Product data subject to change without notice
Thread Measurements
The inch label for threads in imperial and metric fittings do not match the inches on a ruler.
The measurements of the 1 1/4" thread are:
Major - OD = 41.9mm
Minor - ID = 39.0mm
The measurements of the 1" thread are:
Major - OD = 33.2mm
Minor - ID = 30.3mm
Material: Polypropylene
Manufacturing standards: BS21, ISO727, ISO7-1, DIN-2999, ISO9001, ISO14001
Jointing process: BSP thread (with use of thread sealant such as PTFE tape).
Maximum working pressure: 10bar
Manufacturer: Bosta*
Operating temperature: 0-60°C
*(We usually have plenty of these in stock; however, if we have a sudden large demand and run short, an alternative manufacturer's part, with the same specifications and as close to the same dimensions stated above, may be supplied in its place)
This 1 1/4" x 1" MBSP x FBSP clamp saddle reducing bush is compatible with 1 1/4" female BSP threaded clamps, which will thread onto the male BSP end, and 1" male BSP fittings, which will thread into the female BSP end. It is not compatible with metric PVC pressure pipes or plain fittings; however, it is compatible with the 1 1/4" female BSP threaded end or 1" male BSP threaded end of a metric plain to threaded fitting.
PVC (or PVCU) is one of the most widely used plastics in general industry. Its ease of installation, rigidity, WRAS approval, and low price point compared to many other plastics makes it ideal for applications such as:
In addition, PVC pipe also finds its way into many domestic applications, including:
The current stock status of this item is:
IN STOCK for immediate dispatch by carrier.
Delivery options for this item are:
This 1 1/4" x 1" BSP clamp saddle reducing bush is eligible for return - please see our returns page for more information.
WRAS approved (suitable for potable water)